As we know, compressed air had been widely applied in many
industries all over the world. Compresses air solution in scientifically will be highly improved the efficiency for
ownership, saving energy and saving money during the whole process.
How to choose a line air filter will be an important question for everyone before they make
decision.
Product Feature & Advantage
①Filtration performance up to 99.99% under the rate working
conditions
②Aluminum Alloy Air Filter case, with 15 years serve life, lowest ownership overall cost
③7 Layers for Filter Element, fiber glass material, PF/AO/AA/AX with 4000-6000 hours spanlife
④Effectively filter solid particles up to 0.01 microns, suspended
oil up to 0.003mg/m³
⑤Die-casting technology filter connection up to RC 4", capacity
from 1.0m³/min to 48m³/min
⑥Both inside and outside housing with anti-corrosion treatment,
prevent second pollution from itself
⑦Low Pressure drop for ownership
⑧Replace filter element without third-party or any tools
7 Grades Filter Element in Detail
PF: As a primary filter, particles whose diameter more than 5μm can be
remove,the maxi. residual oil content is negligible
AO: High efficiency general protection, dust particles, water mist &
oil mist whose diameter more than 1μm can be removed, the residual
content of oil mist does not exceed 0.6mg/m³ (21ºC),1ppm(w).
AA: High effiency oil remove filtration, dust particles, water mist and
oil mist whose diameter more than 0.01μm can be removed, the
residual content of oil mist does not exceed 0.01mg/m³(21ºC),0.01ppm(w)
AX: Ultra-efficient filtration, dust particles, water mist&oil mist
whose diameter more than 0.01μm can be removed, the residual
content of oil mist does not exceed 0.001mg/m³(21ºC),0.001ppm(w)
ACS: Dust particles whose diameter more than 0.01μm, oil vapor &odor
can be removed, the maxi. resident content of oil vapor does not
exceed 0.003mg/m³(21ºC),0.003ppm(w)
AR: Dust particles whose diameter more than 1μm can be removed
AAR: Dust particles whose diameter more than 0.01μm can be removed
Technical Specification
The flow rate below is the treatment capacity of compressed air
under rated working pressure 7 barg (100psi g).For application in other working pressure, please refer to the
correction factors.| Model | Pipe size | Flow rates | Dimension (mm) |
| L/S | m³/min | scfm | W(Width) | D(Depth) | H(Height) | A | B | C |
| YF010 | RC1/2" | 16.7 | 1.0 | 35.3 | 96 | 79 | 261 | 29 | 198 | 118 |
| YF020 | RC3/4" | 25.0 | 1.5 | 53.0 | 96 | 79 | 261 | 29 | 198 | 118 |
| YF030 | RC3/4" | 30.0 | 1.8 | 63.6 | 96 | 79 | 295 | 29 | 233 | 153 |
| YF040 | RC1" | 33.3 | 2.0 | 71.0 | 96 | 79 | 295 | 29 | 233 | 153 |
| YF060 | RC1" | 60.0 | 3.6 | 127.0 | 138 | 111 | 403 | 37 | 296 | 208 |
| YF070 | RC1" | 83.3 | 5.0 | 177.0 | 138 | 111 | 503 | 37 | 396 | 303 |
| YF080 | RC1-1/2" | 125.0 | 7.5 | 265.0 | 138 | 111 | 503 | 37 | 396 | 303 |
| YF090 | RC2" | 166.7 | 10.0 | 353.1 | 174 | 142 | 736 | 58 | 607 | 469 |
| YF100 | RC2-1/2" | 216.7 | 13.0 | 459.0 | 174 | 142 | 736 | 58 | 607 | 469 |
| YF110 | RC2" | 283.3 | 17.0 | 600.0 | 174 | 142 | 1016 | 58 | 887 | 794 |
| YF120 | RC2-1/2" | 316.7 | 19.0 | 671.0 | 174 | 142 | 1016 | 58 | 887 | 794 |
| YF130 | RC3" | 416.7 | 25.0 | 883.0 | 220 | 184 | 793 | 74 | 649 | 514 |
| YF140 | RC4" | 466.7 | 28.0 | 989.0 | 220 | 184 | 793 | 74 | 649 | 514 |
| YF150 | RC3" | 683.3 | 41.0 | 1448.0 | 220 | 184 | 1050 | 74 | 906 | 764 |
| YF160 | RC4" | 800.0 | 48.0 | 1695.0 | 220 | 184 | 1050 | 74 | 906 | 764 |
| Technical requirements | Maximum operating pressure: 10 barg Operating temperature:
1.5~80°C. |
| Pressure | Barg | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
| Psig | 15 | 29 | 44 | 59 | 73 | 87 | 100 | 116 | 131 | 145 | 160 | 174 | 189 | 203 | 219 | 232 |
| Correction factor | 0.38 | 0.53 | 0.65 | 0.76 | 0.85 | 0.93 | 1.00 | 1.07 | 1.13 | 1.19 | 1.23 | 1.31 | 1.36 | 1.41 | 1.46 | 1.51 |
YUKA service
a. Providing professional consultation, technical support and
Compressed air solutions
b. Providing timely feedback on any complaints
c. Providing perfect after sales service and reasonable warranty
Q:Why choose us?
a. Over 20 years' practical experiences in R&D and
manufacturing Compressed air treatment;
b. Founder of Compressed Air Nation Standard GB/T30475.1-2013 and
GB/T30475.2-2013;
c. ISO 9001:2015, CE and product follow ISO8573-1;
d. With Germany Imported high efficiency filtration Test
Instrument;
e. All goods had been 100% test before dispatched.
Frequently Asked Questions
Q1. What kind of your company is it?
We're the manufacturer integrated with R&D, production and
sales of filtration separation and purification
Q2. How about your technical conditions and production capability?
Complete process documents and equipment, mass production ability.
Q3. What is the delivery time?
Delivery time depends on the order quantity, normally is 3-5
working days after 30% payment.
Q4. Do you have a warranty?
Yes, for filter, it is 15 years warranty
Q5. Can you supply customized product?
Yes, we have a professional technical team to provide you with the
best solution and complete production processes and control to
provide you with satisfied product.
