Home > Aluminum Compressed Air Filter >

Installation method of compressed air filter

Product Categories

Aluminum Compressed Air Filter [156]
Compressed Air Filter [79]
Refrigerated Air Dryers [17]
Compressed Air Dryer [5]
Integrated Refrigerated Desiccant Air Dryer [6]
Stainless Steel Compressed Air Filter [20]
Activated Carbon Compressed Air Filter [10]
Water Gas Separators [5]
Automatic Drain [5]
Desiccant Air Dryers [2]

Hongrijia Depurate Facility Science & Technology Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Installation method of compressed air filter

Ask Lasest Price
Brand Name :	Yuka
Price :	Negotiable
Delivery Time :	3-7working days
Payment Terms :	L/C,T/T
Supply Ability :	300,000pcs/month

Add to Cart

Product Details
Company Profile

Installation method of compressed air filter

Product Description

Installation method of Compressed Air Filter

①Install and use within the specified working pressure and working temperature range, and install all levels of filters in the correct order according to the air inlet and outlet instructions or the direction indicated by the arrow, from coarse to fine installation. Avoid bypass as much as possible during installation. Because the oil in the air is bypassed to the downstream of the filter and then sticks to the inner wall of the pipeline, it is difficult to find effective means to remove it.

②The Filter Element should be replaced regularly. When replacing the filter element, use an Allen wrench to unscrew the four screws of the lower cover and take out the old filter element from below. Carefully record the replacement time. It is recommended that the working time z should not exceed 8000 hours.

③The discharge time of the auto drain is suitable for draining the liquid water, and the discharge interval is subject to the water content in the pipeline;

④Different grades of compressed Air Filters can be equipped with electronic drain valves or manual valves according to customer requirements.

7 Grades Filter Element: PF/AO/AA/AX/ACS/AR/AAR

PF	AO	AA	AX	ACS	AR	AAR
As a primary filter, particles whose diameter more than 5μm can be remove,the maxi. residual oil content is negligible	High efficiency general protection, dust particles, water mist & oil mist whose diameter more than 1μm can be removed, the residual content of oil mist does not exceed 0.6mg/m³ (21ºC),1ppm(w).	High effiency oil remove filtration, dust particles, water mist and oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.01mg/m³(21ºC),0.01ppm(w)	Ultra-efficient filtration, dust particles, water mist&oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.001mg/m³(21ºC),0.001ppm(w)	Dust particles whose diameter more than 0.01μm, oil vapor &odor can be removed, the maxi. resident content of oil vapor does not exceed 0.003mg/m³(21ºC),0.003ppm(w)	Dust particles whose diameter more than 1μm can be removed	Dust particles whose diameter more than 0.01μm can be removed

International test and measurement standard ISO12500
>ISO 12500 has made clear a general test and definition method for the compressed air filter manufacturers. The main performance
parameters are the air inlet oil content and particles size distribution of the solid particles.
>ISO12500-1 specifies the test requirements for the filtration performance of oil aerosol in the coalescing filter.
>ISO12500-2 specifies the test requirements of adsorption filters for the removal performance of steam adsorption.
>ISO12500-3 specifies the requirements for removal of particulate matter from solid pullutants.

Product are test with the international advanced testing equipment based on standard ISO12500, Which is equivalent to the standard ISO8573.1-2010 quality standard, and provide filter performance test report.

Filtration Grade	PF	AO	AA	AX	ACS	AR	AAR
Size of solid particles(ISO12500-3)	5μm	1μm	0.01μm	0.01μm	-	1μm	0.01μm
Filtration performance of solid particles(ISO12500-3)	-	99.999+%	99.999+%	99.999+%	99.999+%	99.999+%	99.999+%
Filtration performance of oil(ISO12500-1)	50%	80+%	99.9+%	99.99+%	-	-	-
Residual oil content(ISO12500-1)	5mg/m³	0.6mg/m³	<0.01mg/m³	<0.001mg/m³	<0.004mg/m³	-	-

Product Picture

compressed air water filter Compressed air filter element

Technical Specification

The flow rate below is the treatment capacity of compressed air under rated working pressure 7 barg (100psi g).For application in other working pressure, please refer to the correction factors.

Model	Pipe size	Flow rates			Dimension (mm)
Model	Pipe size	L/S	m³/min	scfm	W(Width)	D(Depth)	H (Height)	A	B	C(clearance for housing)
YFB010	RC1/2"	16.7	1.0	35.5	96	79	252	29	223	118
YFB020	RC3/4"	25.0	1.5	53.0	96	79	252	29	223	118
YFB030	RC3/4"	30.0	1.8	63.6	96	79	286	29	257	153
YFB040	RC1"	33.3	2.0	71.0	96	79	286	29	257	153
YFB060	RC1"	60.0	3.6	127.0	138	111	357	37	320	208
YFB070	RC1"	83.3	5.0	177.0	138	111	458	37	421	303
YFB080	RC1-1/2"	125.0	7.5	265.0	138	111	458	37	421	303
YFB090	RC2"	166.7	10.0	353.1	174	142	558	58	500	467
YFB100	RC2-1/2"	216.7	13.0	459.0	174	142	558	58	500	467
YFB110	RC2"	283.3	17.0	600.0	174	142	838	58	780	794
YFB120	RC2-1/2"	316.7	19.0	671.0	174	142	838	58	780	794
YFB130	RC3"	416.7	25.0	883.0	220	184	645	74	571	514
YFB140	RC4"	466.7	28.0	989.0	220	184	645	74	571	514
YFB150	RC3"	683.3	41.0	1448.0	220	184	902	74	828	764
YFB160	RC4"	800.0	48.0	1695.0	220	184	902	74	828	764
Technical requirements	Maximum operating pressure: 16 barg Maximum operating temperature: 80°C Minimum operating temperature:1.5°C

Pressure	Barg	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16
Pressure	Psig	15	29	44	59	73	87	100	116	131	145	160	174	189	203	219	232
Correction factor		0.38	0.53	0.65	0.76	0.85	0.93	1.00	1.07	1.13	1.19	1.23	1.31	1.36	1.41	1.46	1.51

YUKA Package
Yuka High Grade Compressed Air Filter for Automatic Industry (YF-B090)

YUKA service
a. Providing professional consultation, technical support and special solutions
b. Providing timely feedback on complaints
c. Providing perfect after sales service and warranty

Q:Why choose us?
a. Over 20 years' practical experiences in R&D and manufacturing Compressed air treatment;
b. Founder of Compressed Air Nation Standard GB/T30475.1-2013 and GB/T30475.2-2013;
c. ISO 9001:2015, CE and product follow ISO8573-1;
d. With Germany Imported high efficiency filtration Test Instrument;
e.All goods had been 100% test before dispatched.

FAQ
Q1. What kind of your company is it?
We're the manufacturer integrated with R&D, production and sales.

Q2. How about your technical conditions and production capability?
Complete process documents and equipment, mass production.

Q3. What is the delivery time?
Delivery time depends on the order quantity, normally is 3-5 working days after 30% payment.

Q4. Do you have a warranty?
Yes, for filter, it is 1 year normally.

Q5. Can you supply customized product?
Yes, we have a professional technical team to provide you with the best solution and complete production processes and control to provide you with satisfied product.

Installation method of compressed air filter

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Hongrijia Depurate Facility Science & Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Aluminum Compressed Air Filter products from this supplier

Find Similar Products By Category:

Telecommunications

Hot Searches: