About Compressed Air:
Compressed air is the second-largest power source after
electricity, and it has a multi-purpose process gas source. The
unfiltered and separated
compressed air contains a considerable amount of water, solid
particles, dust, oil mist, bacteria and other pollutants. These
pollutants have a certain impact on the profitability and production costs of the factory. In
order to maintain the competitive advantage of the factory, It is
necessary to implement sustainable measures and apply quality-assured purification
equipment.
Element Instruction:
1. FPM series ring blocks the air before and after filtering to
achieve a better filtering effect.
2. The supporting cylinder adopts stainless steel to ensure the Filter Element strength and the layered filtration design guarantees the
filtering precision of filter element.
3. 96% porosity have strong capacity of holding dusts, serve life
up 6000 to 8000 hours.
4. The cover is made of PA+GF, free from deformation at 1.8mpa
pressure and high temperature of 240ºC and capable of resisting
general acid and alkali chemical corrosion and withstanding the severe compressed air
environment. And with extremely strong hydrophobic and oilphobic.
5. The inside and outside support network is made of stainless
steel to ensure the filter element strength, protect the glass
fiber in production process, prevent the damage to filter element due to material rusting and avoid the
damage to filter element due material rusting and avoid the
secondary pollution of compressed air.
6. Special material for the outer layer of the filter element can
aggregate the water and oil, therefore prevent the oil or water
from being blown away and achieve the better drying and filtering effect.
YD series filter element filtration precision and performance:
 | | | |  | | |
| PF | AO | AA | AX | ACS | AR | AAR |
| As a primary filter, particles whose diameter more than 5μm can be
removed, the maximum residual oil contect is negligible. | High efficiency general protection, dust particles, water mist and
oil mist whose diameter more than 1μm can be removed, the residual
content of oil mist does not exceed 0.6mg/m³(21ºC), 1ppm(w). | High efficiency oil removal filtration, dust particles, water mist
and oil mist whose diameter more than 0.01μm can be removed, the
residual content of oil mist does not exceed 0.01mg/m³(21ºC),
0.01ppm(w). | Ultra-efficient filtration, dust particles, water mist and oil mist
whose diameter more than 0.01μm can be removed, the residual
content of oil mist does not exceed 0.001mg/m³(21ºC), 0.001ppm(w). | Dust particles whose diameter more than 0.01μm, oil vapor and odor
can be removed, the maximum residual residual content of oil vapor
does not exceed 0.003mg/m³(21ºC), 0.003ppm(w). | Dust particles whose diameter more than 1μm can be removed. | Dust particles whose diameter more than 0.01μm can be removed. |
International test and measurement standard ISO12500
1.ISO 12500 has made clear a general test and definition method for
the Compressed Air Filter manufacturers. The main performance parameters
are the air inlet oil content and particles size distribution of
the solid particles.
2.ISO12500-1 specifies the test requirements for the filtration
performance of oil aerosol in the coalescing filter.
3.ISO12500-2 specifies the test requirements of adsorption filters
for the removal performance of steam adsorption.
4.ISO12500-3 specifies the requirements for removal of particulate
matter from solid pullutants.
0.1 Micron Filtration New Air Element L058
Why choose YUKA as your long term business partner?
YUKA's YD series Air Filters are ideal solutions for removing pollutants in compressed air
systems and saving energy. Use imported quality filter materials
and design technology to ensure high-quality compressed air quality and lower
operating costs.
We have a full set of testing equipment imported from Europe.
Filters and gas-water separators can be tested and rated according
to ISO 8573.1: 2009 air quality standards, and provide performance
test reports.
YUKA's Factory and Facilities:
YUKA has more than 20 years of professional manufacturing and
trading experiences in compressed air
purification & separation industry to service our brand customers
like below:
YUKA attended Exhibitions in Shanghai Comvac Asia & Germany
Hannover Messe:
Packing & Shipping:
Packing: Good packing will protect the goods from damage during transport.
We use strong, durable packing material to pack the goods.
Shipping: By air,by sea ,by express
FAQ:
Q1. What kind of your company is it?
We're the manufacturer integrated with R&D, production and
sales.
Q2. How about your technical conditions and production capability?
Complete process documents and equipment, mass production.
Q3. What is the delivery time?
Delivery time depends on the order quantity, normally is 3-5
working days after 30% payment.
Q4. Do you have a warranty?
Yes, for filter element, it is 6000-8000hours
Q5. Can you supply customized product?
Yes, we have a professional technical team to provide you with the
best solution and complete production processes and control to
provide you
with satisfied product.
Q6. what's the delivery way?
shipping way: air freight, express, sea
