High Efficiency Stainless Steel Replacement Filter Element BHL030
Element Instruction
1. FPM series ring blocks the air before and after filtering to achieve a
better filtering effect.
2. The supporting cylinder adopts stainless steel to ensure the
filter element strength and the layered filtration design
guarantees the filtering precision of
filter element.
3. 96% porosity have strong capacity of holding dusts, serve life up 6000 to 8000 hours.
4. The cover is made of PA+GF+Stainless steel, free from deformation at 1.8mpa pressure and high temperature of 240ºC and capable of resisting general acid and alkali chemical
corrosion and withstanding the severe compressed air environment.
And with extremely strong hydrophobic and oilphobic.
5. The inside and outside support network is made of stainless steel to ensure the filter element strength, protect the glass fiber in
production process, prevent
the damage to filter element due to material rusting and avoid the
damage to filter element due material rusting and avoid the
secondary pollution of compressed air.
6. Special material for the outer layer of the filter element can
aggregate the water and oil, therefore prevent the oil or water
from being blown away and achieve
the better drying and filtering effect.
Technical Specification
| Model Number | BHL017 | BHL025 | BHL030 | BHL035 | BHL058 | BHL068BH | BHL080 | BHL145 | BHL220 | BHL260 | BHL330 | BHL360 | BHL405 | BHL460 | BHL620 |
Flow Rate
(m³/min) | 1 | 1.5 | 1.8 | 2.0 | 2.8 | 3.6 | 4.8 | 7.2 | 12.0 | 14.0 | 16.0 | 19.0 | 22.0 | 28.0 | 37.2 |
| Filter Grade | PF/AA/AO/AX/ACS/AR/AAR |
Stainless Steel Air Filter Element Filtration Precision & Performance
 | | | |  | | |
| PF | AO | AA | AX | ACS | AR | AAR |
| As a primary filter, particles whose diameter more than 5μm can be
removed, the maximum residual oil contect is negligible. | High efficiency general protection, dust particles, water mist and
oil mist whose diameter more than 1μm can be removed, the residual
content of oil mist does not exceed 0.6mg/m³(21ºC), 1ppm(w). | High efficiency oil removal filtration, dust particles, water mist
and oil mist whose diameter more than 0.01μm can be removed, the
residual content of oil mist does not exceed 0.01mg/m³(21ºC),
0.01ppm(w). | Ultra-efficient filtration, dust particles, water mist and oil mist
whose diameter more than 0.01μm can be removed, the residual
content of oil mist does not exceed 0.001mg/m³(21ºC), 0.001ppm(w). | Dust particles whose diameter more than 0.01μm, oil vapor and odor
can be removed, the maximum residual residual content of oil vapor
does not exceed 0.003mg/m³(21ºC), 0.003ppm(w). | Dust particles whose diameter more than 1μm can be removed. | Dust particles whose diameter more than 0.01μm can be removed. |
International test and measurement standard ISO12500
>ISO 12500 has made clear a general test and definition method
for the Compressed Air Filter manufacturers. The main performance parameters
are the air inlet oil content and particles size distribution of
the solid particles.
>ISO12500-1 specifies the test requirements for the filtration
performance of oil aerosol in the coalescing filter.
>ISO12500-2 specifies the test requirements of adsorption
filters for the removal performance of steam adsorption.
>ISO12500-3 specifies the requirements for removal of
particulate matter from solid pullutants.
Products are tested with the international advanced testing
equipment based on standard ISO12500,
which is equivalent to the standard ISO8573.
| Filtration Grade | PF | AO | AA | AX | ACS | AR | AAR |
| Size of solid particles(ISO12500-3) | 5μm | 1μm | 0.01μm | 0.01μm | - | 1μm | 0.01μm |
| Filtration performance of solid particles(ISO12500-3) | - | 99.999+% | 99.999+% | 99.999+% | 99.999+% | 99.999+% | 99.999+% |
| Filtration performance of oil(ISO12500-3) | 50% | 80+% | 99.9+% | 99.99+% | - | - | - |
| Residual oil content(ISO12500-1) | 5mg/m³ | 0.6mg/m³ | <0.01mg/m³ | <0.001mg/m³ | <0.004mg/m³ | - | - |
Why choose YUKA as your long term business partner?
YUKA's YD series filters are ideal solutions for removing
pollutants in compressed air systems and saving energy. Use
imported quality filter materials and design
technology to ensure high-quality compressed air quality and lower
operating costs.
We have a full set of testing equipment imported from Europe.
Filters and gas-water separators can be tested and rated according
to ISO 8573.1: 2009
air quality standards, and provide performance test reports.
Packing & Shipping
Packing: Good packing will protect the goods from damage during transport.
We use strong, durable packing material to pack the goods.
Shipping: By air,by sea ,by express
FAQ
Q1. What kind of your company is it?
We're the manufacturer integrated with R&D, production and
sales.
Q2. How about your technical conditions and production capability?
Complete process documents and equipment, mass production.
Q3. What is the delivery time?
Delivery time depends on the order quantity, normally is 3-5
working days after 30% payment.
Q4. Do you have a warranty?
Yes, for filter element, it is 6000-8000hours
Q5. Can you supply customized product?
Yes, we have a professional technical team to provide you with the
best solution and complete production processes and control to
provide you
with satisfied product.
Q6. what's the delivery way?
shipping way: air freight, express, sea
Q7. Could you Calculate the shipping cost for me?
Yes, we are honored to do that for you! Before the freight , please
well let us know which seaport or airport near your
